CNC sTaper 1.2.2 APK
APK Version History
- Version
- 1.2.2 (6)
- Architecture
- universal
- Release Date
- April 14, 2024
- Requirement
- Android 3.0+
About Radio FM 90s
It has been translated by a translation program.
If you have a taper, you can be calculated as follows.
- gradient
- Angle
- Various coordinate
- The coordinates of the arc tangent
- compensated coordinates
And you can use the four edge directions to calculate the coordinates of the inner diameter and outer diameter,
In order to generate CNC code for you,
Cutting direction can be set to forward or reverse.
sTaper includes the CNC Unit Convereter.
So you can convert from one unit to another, and the tolerances can be calculated.
If you have a taper, you can be calculated as follows.
- gradient
- Angle
- Various coordinate
- The coordinates of the arc tangent
- compensated coordinates
And you can use the four edge directions to calculate the coordinates of the inner diameter and outer diameter,
In order to generate CNC code for you,
Cutting direction can be set to forward or reverse.
sTaper includes the CNC Unit Convereter.
So you can convert from one unit to another, and the tolerances can be calculated.
What's New in this version
There was an error in the Galaxy tab2 10.1 and Sony Xperia L. But I failed to get the device. So, I was trying to find where the problem occurs. Found a potential one, I have modified it.